This 1-litre packaging is specifically recommended for heavy/frequent consumption of gel. Moreover, you’ll benefit from an attractive price because of its large size.
E-Swin gel is applied in thick layers during each session. Once used on the skin and flashed, it should under no circumstances be collected and reused elsewhere as the flash can modify the gel’s optical characteristics.
A proper optical transmission isn’t possible without the use of a good quality gel that’s free from any colour. All our clinical studies have been conducted using this gel.
The use of any other non-clinically tested gel with our products will void the guarantee of your device.
This white E-Swin pencil is used to outline the area to be flashed. The pencil must be used before the gel is applied.
Important note: only this pencil should be used to mark out the area to be treated. Manufactured in a pure white colour, it’s been tested to ensure it will not react with the flash. The use of any other pencil may cause skin burns.
Designed and developed to protect eyes during the sessions, these safety glasses are essential when using any E-Swin device. They must be worn by everyone present during flash treatment sessions in order to prevent dazzling.
Note: during some treatments, patients are required to wear protective eye shells – ‘eye mask’. If in doubt, please refer to the user manual provided with your device.
Contents: 1 pair of safety glasses and 1 protective case
These protective eye shells must be worn by people being treated with P-O75, E-Eye, W-O75, E-Clean (and WE-O when in ‘collagen stimulation’ mode). ‘Eye mask’ is used to protect your patient’s eyes and must be correctly adjusted during the session.
Disinfect the ‘eye mask’ shells after each session.
This plate is made from a material that’s resistant to flashes and is designed to be used with P-O75. It enables you to target a blemish or set of pigmentary blemishes with more precision. 7 diameters are available on the plate. Place the diameter of the desired hole on the area to be treated, before applying the gel and then flash.
This plate is reusable; it must be rinsed with water and carefully wiped after each use.
The filter selects the waves emitted by your device, such as UV, for completely safe operation. Before each use, check the condition of your filter. If the filter has any scratches or if little dots appear, it must be replaced.